When I push the front panel light/button on my Super Hub to connect to compatible WPS devices, nothing happens. The 1st time I tried it flashed red and blue as it should but did not connect to my WPS device. I've cycled the power and left it overnight in case it needed to reset but alas I cannot get the light to flash again. I have tried to use the PIN approach but again while it claims to be searching the light on the Hub does not flash and it does not connect to my WPS device.
I too had problems connecting to wireless devices using WPS. I discovered the problem was that WPS was not enabled on the hub. There is a small label on the hub. Go to the web site on the label, enter the password from the label, and on the home page click on the 'advanced settings' button. Then the WPS button. Finally enable WPS on the hub.
You can then use the hub or a PIN to activate the wireless device.
Once I had enabled WPS connection was a doddle.
Thanks to the guy on the VM helpdesk who helped me solve the problem