on 04-05-2022 23:39
My speeds can be somewhat erratic at times, and some stable as can be. I am on the 1gb Volt service i just upgraded to.
A lot of the time i am getting the speeds I'm suppose to be getting, but at certain times the speed tanks.
This is my BQM:
Any Insight would be appreciated thanks!
Any insight would be much appreciated!
on 04-05-2022 23:42
Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID
26 | 339000000 | 3.6 | 40.4 | QAM256 | 26 |
1 | 139000000 | 2.4 | 40.4 | QAM256 | 1 |
2 | 147000000 | 2.4 | 40.4 | QAM256 | 2 |
3 | 155000000 | 3.2 | 40.9 | QAM256 | 3 |
4 | 163000000 | 2.8 | 40.9 | QAM256 | 4 |
5 | 171000000 | 2.4 | 40.9 | QAM256 | 5 |
6 | 179000000 | 2.4 | 40.9 | QAM256 | 6 |
7 | 187000000 | 2.4 | 40.9 | QAM256 | 7 |
8 | 195000000 | 2.4 | 40.4 | QAM256 | 8 |
9 | 203000000 | 2.4 | 40.9 | QAM256 | 9 |
10 | 211000000 | 2.7 | 40.4 | QAM256 | 10 |
11 | 219000000 | 2.8 | 40.9 | QAM256 | 11 |
12 | 227000000 | 2.8 | 40.4 | QAM256 | 12 |
13 | 235000000 | 2.6 | 40.4 | QAM256 | 13 |
14 | 243000000 | 2.6 | 40.9 | QAM256 | 14 |
15 | 251000000 | 2.8 | 40.9 | QAM256 | 15 |
16 | 259000000 | 3 | 40.9 | QAM256 | 16 |
17 | 267000000 | 2.9 | 40.4 | QAM256 | 17 |
18 | 275000000 | 2.9 | 40.4 | QAM256 | 18 |
19 | 283000000 | 3.2 | 40.4 | QAM256 | 19 |
20 | 291000000 | 3.5 | 40.9 | QAM256 | 20 |
21 | 299000000 | 3.9 | 40.4 | QAM256 | 21 |
22 | 307000000 | 3.6 | 40.4 | QAM256 | 22 |
23 | 315000000 | 3.4 | 40.4 | QAM256 | 23 |
24 | 323000000 | 3.4 | 40.4 | QAM256 | 24 |
25 | 331000000 | 3.6 | 40.9 | QAM256 | 25 |
27 | 347000000 | 3.5 | 40.4 | QAM256 | 27 |
28 | 355000000 | 3.2 | 40.4 | QAM256 | 28 |
29 | 363000000 | 3.1 | 40.4 | QAM256 | 29 |
30 | 371000000 | 3.3 | 40.9 | QAM256 | 30 |
31 | 379000000 | 3.6 | 40.9 | QAM256 | 31 |
Channel Lock Status RxMER (dB) Pre RS Errors Post RS Errors
26 | Locked | 40.366287 | 0 | 0 |
1 | Locked | 40.366287 | 0 | 0 |
2 | Locked | 40.366287 | 0 | 0 |
3 | Locked | 40.946209 | 0 | 0 |
4 | Locked | 40.946209 | 0 | 0 |
5 | Locked | 40.946209 | 0 | 0 |
6 | Locked | 40.946209 | 0 | 0 |
7 | Locked | 40.946209 | 0 | 0 |
8 | Locked | 40.366287 | 0 | 0 |
9 | Locked | 40.946209 | 0 | 0 |
10 | Locked | 40.366287 | 0 | 0 |
11 | Locked | 40.946209 | 0 | 0 |
12 | Locked | 40.366287 | 0 | 0 |
13 | Locked | 40.366287 | 0 | 0 |
14 | Locked | 40.946209 | 0 | 0 |
15 | Locked | 40.946209 | 0 | 0 |
16 | Locked | 40.946209 | 0 | 0 |
17 | Locked | 40.366287 | 0 | 0 |
18 | Locked | 40.366287 | 0 | 0 |
19 | Locked | 40.366287 | 0 | 0 |
20 | Locked | 40.946209 | 0 | 0 |
21 | Locked | 40.366287 | 0 | 0 |
22 | Locked | 40.366287 | 0 | 0 |
23 | Locked | 40.366287 | 0 | 0 |
24 | Locked | 40.366287 | 0 | 0 |
25 | Locked | 40.946209 | 0 | 0 |
27 | Locked | 40.366287 | 0 | 0 |
28 | Locked | 40.366287 | 0 | 0 |
29 | Locked | 40.366287 | 0 | 0 |
30 | Locked | 40.946209 | 0 | 0 |
31 | Locked | 40.946209 | 0 | 0 |
on 04-05-2022 23:43
Channel Channel Width (MHz) FFT Type Number of Active Subcarriers Modulation (Active Profile) First Active Subcarrier (Hz)
159 | 96 | 4K | 1880 | QAM4096 | 759 |
3.1 Downstream channels
Channel ID Lock Status RxMER Data (dB) PLC Power (dBmV) Correcteds (Active Profile) Uncorrectables (Active Profile)
159 | Locked | 44 | 6.4 | 84087874 | 0 |
Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID
1 | 39400000 | 43.5 | 5120 KSym/sec | 64QAM | 4 |
2 | 46200000 | 43.8 | 5120 KSym/sec | 64QAM | 3 |
3 | 53700000 | 44.3 | 5120 KSym/sec | 64QAM | 2 |
4 | 60300000 | 44.8 | 5120 KSym/sec | 64QAM | 1 |
3.0 Upstream channels
Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
1 | US_TYPE_STDMA | 0 | 0 | 0 | 0 |
2 | US_TYPE_STDMA | 0 | 0 | 0 | 0 |
3 | US_TYPE_STDMA | 0 | 0 | 0 | 0 |
4 | US_TYPE_STDMA | 0 | 0 | 0 | 0 |
on 05-05-2022 00:35
You have obviously not been following this thread :-
https://community.virginmedia.com/t5/Networking-and-WiFi/VM-CORE-NETWORK-FAILURE-URGANT/td-p/4986440
You will see we are all getting similar problems between 8-10 pm
on 05-05-2022 03:16
on 05-05-2022 10:27
Apart from that, everything looks good.
on 05-05-2022 19:39
Sorry, i am not here very often.. Have been on M200 for a very long time with no issues, only reason i ran a BMQ was to see if there was any issues.. obviously there is. I will keep an eye on the thread you have posted.
Cheers!
on 09-05-2022 15:22
Hi there @The_Oracle
Thank you so much for your post and welcome back to the community forums.
Can I just clarify, are you experiencing issues with your connection? If so what is happening and is it on WiFi or a wired connection?
Thank you.
on 09-05-2022 22:53
I am not having any issues now thanks 🙂
on 12-05-2022 09:17
Thank you for updating the thread 🙂
Cheers,
Ryan.