on 10-04-2022 15:43
My Intelligent WiFi pods arrived yesterday and have plugged it in and left it but white light keeps glowing on and off, which means it has not set up. Have tried in plug next to router and still no joy. Spoke to customer services and was told that someone from IT would call me but no one has as yet. It says if having problems to reset them but I can't find any information on how to do that.
Answered! Go to Answer
on 10-04-2022 20:39
…then the WiFi Pod is not correctly associated with your Hub and you will need to call in to get this fixed or wait here until Virgin Media staff respond, possibly in a couple of days.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 10-04-2022 16:07
The first check is to confirm that your broadband Hub is correctly configured.
The Hub must be configured in Router Mode with a single SSID covering both the 2.4 and 5 GHz WiFi bands.
In addition, Intelligent WiFi must be configured by enabling Channel Optimisation in the Router settings.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 10-04-2022 20:12
That's all correct but still no joy
on 10-04-2022 20:39
…then the WiFi Pod is not correctly associated with your Hub and you will need to call in to get this fixed or wait here until Virgin Media staff respond, possibly in a couple of days.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 12-04-2022 13:54
Spoke to someone at call centre and waiting for a 2nd line call from tech help, still no joy with pod. Being sent another one but would have like the call that i have been promised to try and sort out the one i already have.
on 12-04-2022 15:54
Call the equipment activation number they may be able to help. It's 0800 953 9500 and you will need the Hub serial number/MAC address from the barcode sticker, and your account number.
Also make sure the Hub and Pod are in close proximity until they are paired. Once done you can move the Pod, but not to a black spot. The Pods still need to communicate to the Hub or they will not work. They should be placed halfway between the Hub and the black spot. If this distance is too far from the Hub, you will need an additional Pod to relay the signal.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 12-04-2022 17:13
Contacted the number you mentioned, they have said there is a fault with my line and thats probably the reason that the pod wont connect, engineer is coming on thursday to hopefully sort the problem with the line and the pod
on 14-04-2022 18:32
Hi @BlackpooLWelsh
Sorry to hear you've had issues with your pod. I have check our system and can see that the tech has been and the issue looks resolved at our end. Is that the case at your end also? Please let us know if you are having any further issue and we'll investigate this for you.
on 14-04-2022 21:29
All sorted now, still have a dead spot in attic and would like another pod if possible for 1st floor. Can you organise that or is there a number I should call
on 18-04-2022 09:36
Hi BlackpooLWelsh,
Glad to hear things have been sorted 🙂
I've had a look at things from our side today and can see you've been able to contact us again since posting.
If you do still need help with anything please let us know.
Alex_Rm