on 11-06-2022 00:04
Today i received my hub 5 but after plugin it just blinkink white led very fast. Tryed to switch it off or reset with button, no help. Is it faulti hub or there is way out of it. Virgin deactivated my hub3 straight away so i left with no internet. Any help?
11-06-2022 00:57 - edited 11-06-2022 00:57
Its probably not activated correctly on the account.
Call the equipment activation number on - 0800 953 9500 (option 3) – you will need the serial number/MAC address off the barcode sticker and also your account number,
on 11-06-2022 06:22
I will do when customer service will be working. A company like this dont have 24/7 customer service. Cant get that.
I looked videos online about conecting hub5 and led blinking slowly but mine is rapid blinking. And read some post heare in forum with same issue and hub5 was faulty
on 11-06-2022 11:52
Try a 60 second factory pinhole reset as below;
Remove any ethernet cables from the Hub and hold the pinhole reset switch for 60 seconds. Do NOT reboot the Hub, just let it do it's thing. Note you will need the passwords from the bottom of the Hub afterwards, so make sure they are legible.
The pin hole is on the bottom of the Hub 5, just in case you can't find it.
If the rapid flashing light persists, it sounds like the Hub is faulty.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 11-06-2022 13:58
Tryed reset button, no help. CUstomer service activated my hub3 back so atleast i got internet back. Vaiting for engineer visit on monday. Fingers crossed 😉
Thank you for advices
on 11-06-2022 14:00
@Dvigelis wrote:I will do when customer service will be working. A company like this dont have 24/7 customer service. Cant get that.
The 0800 number does not go through customer service - its auto... just select option 3 when offered and folloe the steps