on 18-09-2021 18:03
Hi, I'm getting some Post RS errors and T3 timeouts. Can anyone tell me if these are normal. Posts below.
Thanks.
on 23-09-2021 07:26
Hi,
So here is my graph and technical info. I can see there's some dropped packets on the graph and I've got some post rs errors and T3 timeouts again. I never used to get any post rs errors or T3 timeouts at all and I leave my hub on for around 2 to 4 weeks at a time before power cycling it and I check the technical information regularly to make sure it is all running nicely and if anything looks out of the ordinary, I post on here.
Downstream bonded channels
Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors
1 | Locked | 40.3 | 47 | 0 |
2 | Locked | 40.3 | 32 | 0 |
3 | Locked | 38.9 | 31 | 0 |
4 | Locked | 40.3 | 46 | 0 |
5 | Locked | 38.9 | 48 | 0 |
6 | Locked | 38.9 | 31 | 0 |
7 | Locked | 40.3 | 39 | 13 |
8 | Locked | 40.3 | 60 | 0 |
9 | Locked | 38.6 | 38 | 0 |
10 | Locked | 38.9 | 48 | 0 |
11 | Locked | 38.9 | 62 | 0 |
12 | Locked | 40.3 | 41 | 0 |
13 | Locked | 40.9 | 48 | 0 |
14 | Locked | 38.9 | 67 | 0 |
15 | Locked | 40.3 | 46 | 0 |
16 | Locked | 40.3 | 57 | 0 |
17 | Locked | 38.9 | 64 | 0 |
18 | Locked | 40.3 | 43 | 0 |
19 | Locked | 40.3 | 66 | 0 |
20 | Locked | 40.3 | 53 | 0 |
21 | Locked | 40.3 | 42 | 0 |
22 | Locked | 38.9 | 52 | 0 |
23 | Locked | 38.9 | 53 | 0 |
24 | Locked | 38.9 | 40 | 0 |
Upstream bonded channels
Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts
1 | ATDMA | 0 | 0 | 1 | 0 |
2 | ATDMA | 0 | 0 | 0 | 0 |
3 | ATDMA | 0 | 0 | 0 | 0 |
4 | ATDMA | 0 | 0 | 2 | 0 |
on 27-09-2021 16:05
Thanks LiamG91
Not liking the look of that
So I can look at this in a bit more detail
If you can check the purple envelope top right of your screen that would be great
Regards
Gareth_L