on 02-09-2021 15:08
Just received my new pack (broadband only). Have connected the hub3 to the power, but the connector in the back and on my wall socket is threaded but the supplied splitter cable provided is push-in and no way will push in without breaking. how is this possible that it’s not compatible with the hub?
Answered! Go to Answer
on 02-09-2021 16:28
Yes those should push on just fine. Push them on quite firmly as far as they go, they are designed to push onto the threaded outlets at both ends.
Thanks Joe
on 02-09-2021 15:20
Hi the cables provided are designed to push onto the threaded outlets. It will go on, you will need to push firmly.
If you would like to attach photos so i can make sure you have what you need please feel free.
Thanks Joe
on 02-09-2021 16:07
Here you go Joe…both ends.
on 02-09-2021 16:14
on 02-09-2021 16:14
on 02-09-2021 16:28
Yes those should push on just fine. Push them on quite firmly as far as they go, they are designed to push onto the threaded outlets at both ends.
Thanks Joe
on 02-09-2021 16:33
That’s worked. Thanks Joe. I was scared of breaking the cables…👍🙈