i have tried accessing settings on 192.168.0.1 cant the browser cant open it . i have tried all browsers but cant access it . i need this to turn the 5gh off temperily whilst i set up cctv .did a malware check and that ok no issues there . can anyone help as #virginmedianeedhelp.com
ggggggggggggggggrrrrrrrrrrrrrrrrrrrrr tried for ages and for last 2 months
Try again on an ethernet cable connected device. You sure its not in modem mode? If so that is accessed on http://192.168.100.1
If no luck, do a pinhole reset on a Hub3 can be a bit problematic - so do it (again) EXACTLY this way (not as the VM website says!).
Firstly, make sure the Hub's sticker/card with the two passwords on it is still there and legible or you will be stuffed ! If its not – DON’T DO IT !
With the Hub switched "on", disconnect any ethernet connections and then push in the “reset pin” with the end of a paperclip/thin nail/SIM tray “tool” or similar (bigger items like ball point pen ends may not press it in far enough) until you feel it at the “stop point” and hold it there firmly for a "timed" minimum of 60 seconds do NOT restart the Hub after that. Leave it 10' or so to stabilise and then your passwords/passphrase for both the Hub settings and the Wifi networks will revert to the two printed on the Hub sticker on its base/side/card. Make sure you use the wifi one for devices connecting to the wifi and the settings/admin one to access the Hub (it is a six digit numeric one).
See if that sorts it.
-------------------- John --------------------
My services: HD TV on VIP (+ Sky Sports & Movies & BT sport), x3 V6 boxes (1 wired 2 WiFi,) SH2 in modem mode with Airport Extreme Router. On VIVID200, Talk Anytime Phone, x2 Mobile SIM only iPhones.