cancel
Showing results for 
Search instead for 
Did you mean: 

Which POD is being used

ozsat
Superstar

So I have a couple of PODs around the house with several devices working fine within the LAN.

But is there any way to determine whether a device has connected to the Hub5 or to one or other of the PODs?

==================================
1.2Gb/100Mb in Oxford (area 31) using SH5
2 REPLIES 2

legacy1
Alessandro Volta
No
---------------------------------------------------------------

Adri_G
Forum Team (Retired)
Forum Team (Retired)

Hey Ozsat, thanks for the post and the questions about our Pods.

Please, be advised when online our pods will not show as a separate network and your devices will always connect on the VM network at home although they may be getting the signal from the pod.

If you're using our Connect App, you'll be able to view how many devices connect to the hub directly and on each pod as well, however it will now show you the list for what device are connecting.

You can view the general list of connected devices but this will not help determine which is connecting where (hub or pod).

Devices usually connect via a pod when that's located closer to them than the hub itself.

We hope this information helps, let us know if you have more questions or concerns.

Adri
Forum Team

New around here? Check out the do's and don'ts, in our Community FAQs