on 02-02-2022 19:41
Hi there,
I'm having a few issues with my Wi-Fi that's been going on for about 3 weeks now.
It keeps dropping connection, very laggy, cutting in and out. You get the picture.
I've moved the router away from the TV, as I've found this can supposedly interrupt the Wi-Fi connection, this hasn't worked.
I've restarted the router multiple times and this hasn't helped the issue.
On a speed test, rather than getting 120 mbps (like I've had before), I now get 60 mbps, or it will start dropping to 0 mbps and then pick itself back up to 60 mbps again.
I have a PC that is on a wired connection and that gets a consistent 100 mbps, but with the other two PC's, they will constantly drop off of the Wi-Fi or still be connected, but lose Internet connection.
Any advice is appreciated!
Answered! Go to Answer
on 02-02-2022 19:57
Can be any number of external environmental factors that affect Wifi.
Are the Wifi bands split with their own SSID’s?
Have you used a Wifi scanner app to look for congested channels?
Then set each band to a fixed, less congested, non-overlapping channel?
on 02-02-2022 19:48
What optimisation have you carried out on the Wifi already?
on 02-02-2022 19:52
None at all, it has been working fine for about 7 months (since it's been installed), now all of a sudden, this unstable-ness has started happening.
on 02-02-2022 19:57
Can be any number of external environmental factors that affect Wifi.
Are the Wifi bands split with their own SSID’s?
Have you used a Wifi scanner app to look for congested channels?
Then set each band to a fixed, less congested, non-overlapping channel?
on 02-02-2022 20:21
Hi,
Apologies, I didn't understand most of that!
I downloaded a Wifi Analyzer app, and there seems to be other Virgin Media routers on the same channel.
How would I change the channel of which my router is on, is this something that I can do?
on 02-02-2022 21:51
Yes you logon to the hub on 192.168.0.1, password on bottom of hub, be careful it’s not the s,e as the WiFi password. I think it’s under advance settings. Note you should only use 1, 6 or 11 channel on the 2.4GHz band.
on 05-02-2022 07:19
If you need to change wifi settings then you will probably have to disable any "intelligent wifi" and "automatic optimisation" if they are optional. You'll certainly have to disable the "auto channel select", but the other/s may still be optional. If you leave them enabled then the hub will start swapping channels of its own accord, and its often that behaviour that causes instability.
Can anybody who still relies on the Hub 3's wifi confirm what the various automatic settings need to be? I've long since stopped relying on the hub's wifi and run the hub in modem mode with my own wifi gear, so when I log in I can't see whatever the latest firmware offers as options.
on 05-02-2022 22:26
Hey guys,
Thanks for the replies and helpful advice, I changed over channels to one that wasn't being used and that seems to have fixed the issue - seems like everyone down my road had VM! I counted 5!
Wi-Fi Analyzer's are a god-send!
Yet again, thanks for the help!
on 08-02-2022 08:52
Hi KitCatC,
Thank you for reaching back out to us in our community and welcome back, glad to hear the advice in our community regarding changing the channel resolved your issue, if you have any further issues or have something you wish to share which may help others, please do not hesitate to reach back out, keep well.
Regards
Paul.
on 13-02-2022 21:52
I have had the same issue with my wi-fi dropping around the same time every night which is very annoying
I have set the following after doing a quick scan, We live in a flat and out of 6 5 have VM as its the only decent service as BT do not have fibre here yet.
Anyway I have changed the settings to Wireless Mode 802.11g/n mixed channel 6 and turned off channel optomisation
Also on the 5GHz ( enabled) the settings are 802.11a/n/ac Channel 40
Can someone confirm if that is ok?