on 28-03-2020 13:30
Hi,
I've just tried to connect a TP Link RE200 range extender to my Superhub but it won't connect. I've tried both the long way & WPS but neither work.
Any idea what the problem could be?
on 28-03-2020 13:31
Won’t connect in what way?
on 28-03-2020 13:32
John, are you setting up the extender in a socket near to the hub? If not, the extender may be out of range to connect to the hub.
Once setup, you can then move the device to a suitable location between your hub and the black spot.
on 28-03-2020 13:44
The extender is less than 3 feet from the hub. It's as though there's no wifi from the hub as I just tried to connect my phone & the hub isn't visible in the list of availbale networks & yes the wifi is switched on I just double checked in case I was having a senior moment!
on 28-03-2020 14:13
You’ve not put it into Modem Mode have you?
28-03-2020 14:20 - edited 28-03-2020 14:21
No, I think it's an issue with the router as it keeps appearing then disappearing from the available network list.
It's the original superhub so it's quite old.
on 03-04-2020 18:13
Is it possible to get a replacement superhub, it looks like I have no Wifi connection to it at all. The devices I have connected by ethernet cable are all working ok
on 07-04-2020 12:31
Hi
I've just finished getting a friend's Hub 3.0 successfully extended with a TP-Link RE200, v4. Let's say it was a bit frustrating... mainly down to out of date information being shipped with the TP device.
Hope this helps.
on 07-04-2020 16:04
I don't have a Hub 3.0 I have the original Superhub, which doesn't seem to be connecting via WiFi to anything. It's visible in the list of available networks but when you select it & try to connect it tries then vanishes from the list.
on 07-04-2020 16:07