on 20-04-2020 19:41
20-04-2020 20:35 - edited 20-04-2020 20:35
Good evening. You need to login to your router using 192.168.0.1 (the address and login password is in the little tag or on the sticker under your router). Then go to Advanced settings> Security > MAC Settings select the device or devices you want to limit by adding them to the MAC filter list and then at the bottom select the times you want to restrict the internet.
Hope this helps.
20-04-2020 20:35 - edited 20-04-2020 20:35
Good evening. You need to login to your router using 192.168.0.1 (the address and login password is in the little tag or on the sticker under your router). Then go to Advanced settings> Security > MAC Settings select the device or devices you want to limit by adding them to the MAC filter list and then at the bottom select the times you want to restrict the internet.
Hope this helps.
on 20-04-2020 21:11
@Jasonsusanmay Let us know if the MAC filtering works for you, but last time I checked it was broken on the Hub 3 and didn't work.
______________________
Scott
My setup: V6 TV box, M350 Fibre broadband with Hub 3 in modem mode connected to a Netgear R7000 router. Telewest/VM user since 2001.
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 25-11-2020 14:53
After spending many hours this morning trying to do the same thing, i've got all my devices filtered at the correct times now, however the setting on the superhub are well out of sync.
The AM / PM hours are inverse and the settings are one day out of sync.
I've got it working perfectly now and have left a diagram in case anyone needs help doing the same in the future.
Virginmedia get your act together, this is ametuer hour and was frustrating as hell to figure out......
on 25-11-2020 14:58
@Spilli wrote:After spending many hours this morning trying to do the same thing, i've got all my devices filtered at the correct times now, however the setting on the superhub are well out of sync.
The AM / PM hours are inverse and the settings are one day out of sync.
I've got it working perfectly now and have left a diagram in case anyone needs help doing the same in the future.
Virginmedia get your act together, this is ametuer hour and was frustrating as hell to figure out......
Just out of interest when you log into your HUB and check the 'Network status' option does the correct date/time show against the login attempt?
25-11-2020 15:08 - edited 25-11-2020 15:16
Carl, is there a Time Zone setting that is wrong in the general settings ?
on 25-11-2020 16:20
Just had a quick look and no, those are all out of whack too. Guessing this is what was causing my particular issue then.
At least my workaround is doing what it needs for now, but after seeing this i suspect at some point it's all going to get out of sync again.
on 25-11-2020 17:07
@MikeRobbo wrote:Carl, is there a Time Zone setting that is wrong in the general settings ?
There isn't an option to change the time / time zone.
I believe the HUB cannot acquire the correct time for some reason.