The new f/w should update with both modem and router mode enabled - the update is delivered to the MAC address.
A reboot can trigger the f/w update if it's not forthcoming, but only if it has been rolled out to your area. I should add that, when testing your connection, I noticed low upstream power levels. These are as a result of some errors on the network segment which I've flagged to Networks.
I'll let you know as soon as have a fault reference to provide.
Run a Puma 6 Test, to see if your latency is better. Just do a Puma 6 Test search on a well known search engine.
-- Red (VM SH2 AC Beta tester) Running on 350Mb VM service with SH3 in Modem Mode, with a ASUS RT-AC5300 router. With this setup I get Fantastic WIRED and WIRELESS Signals in my home. I dont work for VM. But I work in IT, and I know my tech. My advice is at your own risk.
Hah, first time I’ve been pleased and impressed to be told I have a fault! Most of the issues I’ve had have been down to my router (R7000) and my wireless, so I haven’t noticed any issues that I didn’t put down to that. Wired I get get excellent throughput (36MB/s). I just like to have the latest updates
Thanks for checking though! And thanks for logging a fault too
Hi i have just joined the forum,.. was wondering how i can check if my SH3 has the latest firmware installed.. currently the router has to be rebooted every morning its a right pain.. any info would be great.. thanks