cancel
Showing results for 
Search instead for 
Did you mean: 

Problems with wired connection and HUB 4. Ethernet Problem?

Haynfrn
Joining in

I am really hoping someone here might be able to help me. I am not really sure which information is relevant so want to put it all out there. 

A few months ago, my PC with a wired ethernet connection would lose internet connection every night around 3 am and then every 40 minutes or so after until morning. This happened for a few weeks until suddenly stopped and didn't have another issue until these last few days. It previously worked without issues for years. 

My daughter's desktop PC was returned last weekend after a repair/rebuild. She was not able to pick up the wifi very well with this new PC. I bought an external wifi adapter which didn't help. Her previous PC with built-in Wifi had a strong enough connection for gaming and the position hadn't moved. I decided to move her onto a wired connection, bought a "high speed" 20m ethernet cable, and tested it - all seemed to work okay. Secured the wire up the stairs and the internet wouldn't work. There was no damage to the wire. Read the reviews and saw that others had had similar issues with this wire and so bought another. 

I had also bought myself and my son 2x new 10m ethernet cables and installed them, but both did not work. I took them out and reinstalled my ethernet cable and my internet has dropped consistently since.

I reset the router (1-minute pinhole at the back) and when it came back on all the wifi in the house had been affected with all devices losing internet connection. 

The new cables arrived today, and so installed the 10m ethernet cable to see if it might fix the issue but it did not. 

I spoke to Virgin who said that it is likely interference from the ethernet cable as it was from a 3rd party (Amazon) and that they were going to send me a 3m ethernet cable to test and after a few days to let them know if I am still experiencing the same problems. 

We did a speed test which was DOWNLOAD Mbps 86.45 UPLOAD Mbps 0.10. I just did one again and it is DOWNLOAD Mbps 93.9 UPLOAD Mbp 2.79.

I asked if it was possible to test the wifi with them on the phone by taking out the ethernet cable and so took out the ethernet cable and we reset (pinhole at the back). After 5 minutes the internet came back on and would fluctuate between weak and strong. The advisor from Virgin said that the issue was caused by this ethernet cable, I asked if I could buy the cables directly from Virgin. He said no I needed to buy 3rd party ethernet cables but to make sure that they were compatible with Virgin.

This is the latest ethernet that I bought and have no idea if it is compatible. https://www.amazon.co.uk/dp/B0B8M67CY9?psc=1&ref=ppx_yo2ov_dt_b_product_details

I turned off my router for 10 seconds and then back on which seemed to stablise the wifi connections, laptops/phones/tv. After 40 minutes I tried to plug back in the ethernet cable - so far this has not affected the wifi connections (3 hours) but it has lost connection on my PC every 2 - 10 minutes. Sometimes taking seconds to come back on, other times over 5 minutes. 

I have ordered a USB Ethernet connector for my pc in case the problem is the ethernet socket on my desktop, but I am also worried that it may actually be the connections for the ethernet in the router with having had issues with 5 separate ethernet cables and changing the socket which was used. 

 

9 REPLIES 9

Haynfrn
Joining in

3.0 Downstream channels

Channel Frequency (Hz) Power (dBmV) SNR (dB) Modulation Channel ID

253307500004.19999738.983261QAM25625
81947500004.69999738.605377QAM2568
92027500004.59999838.983261QAM2569
102107500004.40000238.983261QAM25610
112187500004.09999838.983261QAM25611
122267500003.90000238.983261QAM25612
132347500003.40000238.983261QAM25613
142427500002.90000238.983261QAM25614
152507500003.20000138.605377QAM25615
162587500003.09999838.983261QAM25616
172667500003.79999938.983261QAM25617
182747500004.69999738.983261QAM25618
192827500004.90000238.605377QAM25619
202907500004.90000238.983261QAM25620
212987500004.50000038.983261QAM25621
223067500004.19999738.983261QAM25622
233147500004.00000038.605377QAM25623
243227500004.30000338.983261QAM25624
263387500004.59999838.983261QAM25626
273467500004.69999738.983261QAM25627
283547500004.59999838.605377QAM25628
293627500005.19999738.983261QAM25629
303707500005.30000338.605377QAM25630
313787500004.69999738.983261QAM25631
323867500004.00000038.605377QAM25632
333947500003.20000138.983261QAM25633
344027500003.40000238.605377QAM25634
354107500003.40000238.983261QAM25635
364187500003.59999838.605377QAM25636
375227500004.40000238.605377QAM25637
385307500004.50000040.366287QAM25638



3.0 Downstream channels

Channel Lock Status RxMER (dB) Pre RS Errors Post RS Errors

25Locked38.98326100
8Locked38.60537700
9Locked38.98326100
10Locked38.98326100
11Locked38.98326100
12Locked38.98326100
13Locked38.98326100
14Locked38.98326100
15Locked38.60537700
16Locked38.98326100
17Locked38.98326100
18Locked38.98326100
19Locked38.60537700
20Locked38.98326100
21Locked38.98326100
22Locked38.98326100
23Locked38.60537700
24Locked38.98326100
26Locked38.98326100
27Locked38.98326100
28Locked38.60537700
29Locked38.98326100
30Locked38.60537700
31Locked38.98326100
32Locked38.60537700
33Locked38.98326100
34Locked38.60537700
35Locked38.98326100
36Locked38.60537700
37Locked38.60537700
38Locked40.36628700



3.1 Downstream channels

Channel Channel Width (MHz) FFT Type Number of Active Subcarriers Modulation (Active Profile) First Active Subcarrier (Hz)
39964K1840QAM4096759


3.1 Downstream channels

Channel ID Lock Status RxMER Data (dB) PLC Power (dBmV) Correcteds (Active Profile) Uncorrectables (Active Profile)
39Locked412.41919880630

3.0 Upstream channels

Channel Frequency (Hz) Power (dBmV) Symbol Rate (ksps) Modulation Channel ID

14310000042.5205995120 KSym/sec64QAM2
23010000043.2705995120 KSym/sec64QAM4
32360000043.0205995120 KSym/sec64QAM9
43660000043.0205995120 KSym/sec64QAM3
54960000042.2705995120 KSym/sec64QAM1



3.0 Upstream channels

Channel Channel Type T1 Timeouts T2 Timeouts T3 Timeouts T4 Timeouts

1US_TYPE_ATDMA0000
2US_TYPE_ATDMA0000
3US_TYPE_ATDMA0000
4US_TYPE_ATDMA0000
5US_TYPE_ATDMA0000



3.1 Upstream channels

Channel Channel Width (MHz) Power (dBmV) FFT Type Modulation
1110.438.02KQAM128


3.1 Upstream channels

Channel Channel Type Number of Active Subcarriers First Active Subcarrier (Hz) T3 Timeouts T4 Timeouts
11OFDMA20853.400

Time Priority Description

Fri Feb
24
6US profile assignment change. US Chan ID: 11; Previous Profile: 12; New Profile: 11.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Fri Feb
24
5MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu Jan
3No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu Jan
3Unicast Ranging Received Abort Response - initializing MAC;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Fri Feb
24
3No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Fri Feb
24
6CM-STATUS message sent. Event Type Code: 16; Chan ID: 39; DSID: N/A; MAC Addr: N/A; OFDM/OFDMA Profile ID: 3.;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Fri Feb
24
5MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu Jan
4Missing Mandatory MDD TLV on primary DS Channel;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu Jan
3No Ranging Response received - T3 time-out;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;
Thu Jan
3Unicast Ranging Received Abort Response - initializing MAC;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.1;

Have only just started BQM, but here is the start. afbd6d99f7dd99467b2e1b8a8a64c2580a4f599b-24-02-2023.png

Please let me know what you think, many thanks!

afbd6d99f7dd99467b2e1b8a8a64c2580a4f599b.png

large.png

Hello Haynfrn

 

We're sorry to hear of the broadband issues experienced, we appreciate you raising these via the forums and welcome to the community.

 

From checking the equipment and connection, all of the specs and levels appear to be within the ranges we'd expect to see them. The speeds are consistent for both download and upload, there were some connection issues Friday but these have resolved themselves since.

 

Have you noticed any upturn in the performance since Friday? We also had to remove the images as they contained personal/private details. Please be sure to remove these in the future.

 

Rob

Thank you for your reply. The wifi has improved following the restart of the router but none of the ethernet connections work. I've tested the wires outside of the house and they are all working, it just seems to be from our router to the PCs. 

I am guessing that our router is faulty, possibly the ethernet ports at the back.

Speaking to support again, I asked if we could get the HUB 5, and apparently, we qualify for one in the next few weeks and due to our package we are a priority. So hopefully, if this does happen quickly and the issues are resolved we know that the issue was with the router. 

It's just strange to have the same issue on three PCs with five ethernet cables, especially as you stated that our numbers are okay.

 

Thanks for the update @Haynfrn.

Can all effected PCs currently obtain a Wi-Fi connection?

It may be a case of simply utilising Wi-Fi until the new hub is issued to you.

Kindest regards,

David_Bn