on 26-06-2022 17:28
Hi I have a hub 3 and can't access it on line, I have followed the steps by typing in 192.168.0.1, I need to change it to 2.4GHz so I can operate my cctv cameras. Is my hub out of date and needing replaced?
Answered! Go to Answer
on 26-06-2022 23:23
Remember modem mode replaces 192.168.0.1 with 192.168.100.1, worth giving that a shot also.
Are you using a phone to access the settings? Sometimes shutting off data (3g/4g/5g) forces the phone to connect over WiFi which is what you want.
Finally, if you have a laptop/desktop, try the address again over ethernet. If all this doesn't work, worth trying a pin hole reset.
on 26-06-2022 18:02
What does the web browser give you? You could try pin hole reset of the hub.
on 26-06-2022 23:23
Remember modem mode replaces 192.168.0.1 with 192.168.100.1, worth giving that a shot also.
Are you using a phone to access the settings? Sometimes shutting off data (3g/4g/5g) forces the phone to connect over WiFi which is what you want.
Finally, if you have a laptop/desktop, try the address again over ethernet. If all this doesn't work, worth trying a pin hole reset.
on 27-06-2022 12:13
Thanks that solved the problem