Post the Network, Upstream and Downstream logs from the hubs admin pages back here as text
***** If you think my answer has helped - please provide me with a Kudos rating and mark as Helpful Answer!! I do not work for Virgin Media - all opinions expressed are of my own and all answers are provided from my own and past experiences. Office 365, Dynamics CRM and Cloud Computing Jedi
as above - if you dont know how to get the figures
log into hub3 - 192.168.0.1 [or 192.168.100.1 if in modem mode] - DON'T SIGN IN, click - click router status [centre of screen] - and post the downstream and upstream figures - to see those press on the grey buttons/boxes labelled - upstream - downstream
No - you were being fobbed off on the phone. Can you do this and see if it helps - if not it will need a Tech visit. ______________
First switch the Hub off for 5 minutes AND unplug it from the mains. Whilst it's off, do a quick check that all of your coax cable connections are in nice and "finger" tight - at the Hub and wall box and also at any connectors etc. Ensure there are no “unterminated cable loose ends. Disconnect all the connections and reconnect to be sure. Also check that the internal wiring is ok with no kinking or chaffing, check that all looks good with the outside cabling and wall box. Then switch it on again and leave 5 minutes
When done, check back in the settings and ensure that the RS error counts have all reset to 0. The T3' should have too. See if the Up power levels have changed too. Then check every hour or two for the next day or two to see if the "errors" start reappearing - they shouldn't.
Also in the meantime... If you haven’t already, set up a free and secure “Broadband Quality Monitor” to continually monitor the state of your connection and record any true network dropouts , latency issues, packet drops, etc - it will thus allow you to differentiate between those and simple wifi dropouts. It does it 24/7/365 and it keeps a visual record of any/all of your network disconnections, useful data to have to match to the Network logs (in your Hub settings) and also in discussions with VM - note it will take a few hours to start seeing a sensible picture - post up the “link” to the “share live graph” (as per instructions on the TB website) when it starts to develop.
I do not work for VM. My services: HD TV on VIP (+ Sky Sports & Movies & BT sport), x3 V6 boxes (1 wired 2 WiFi,) SH2 in modem mode with Airport Extreme Router +2 Airport Express's. On VIVID200, Talk Anytime Phone, x2 Mobile SIM only iPhones.