After my own investigation with issues with my work VoIP phone is it possible for someone from virgin to look at the power levels into my hub.
This VoIP phone has worked perfectly with 3 other broadband service providers but the phone resets on average 3 times in a 4 hour period with virgin broadband since installed in December. I have tried all the usual fixes included replacing all VoIP hardware over the last 3 months.
Is it possible to get virgin to look at the power level input into the hub, I'm under the impression that this can sometimes be an issue?
Yes the mitel device was replaced for new in an attempt to resolve but still having the same issue. Like I previously stated this setup works perfectly with 3 other broadband suppliers but not virgin.
Thanks for coming back to the thread.
Your levels are in spec and no issues found.
Please can you set up a 'Broadband Quality Monitor'. This will monitor the state of your connection and record any network dropouts etc - You can do this at https://www.thinkbroadband.com/broadband/monitoring/quality
Give it a while to gather data and then click 'Share Live graph' and paste the 'Direct Link' into the forum 🙂
Need a helpful hand to show you how to make a payment? Check out our guide - How to pay my Virgin Media bill
Thanks for coming back to us Donnieb3007, I have looked into this and cannot see any issues as confirmed by John, its the same from our side.
How has your connection been running since you last posted, any improvements at all?
Hey Donnieb3007, thanks for the update and sorry to see the VoIP issue is ongoing.
On our latest checks we found no issues with the service or hub, could you please advise if the drop-outs are present on any other devices connecting to the network other than the VoIP calls made?
New around here? Check out the do's and don'ts, in our Community FAQs