on 04-10-2021 15:06
Hello,
Running a Hub 3.0 with ver CH7465LG-NCIP-6.15.30-1p4-NOSH on it.
Wondering what basline numbers is "normal" on Pre and Post Errors, here below is a snip of mine:
Channel Locked Status RxMER (dB) Pre RS Errors Post RS Errors
1 Locked 38.983 110620380 4
2 Locked 38.983 107962764 6
3 Locked 38.983 107964956 5
4 Locked 40.366 107959691 5
*1h after reboot
What I've noticed is that the router reboot itself looking at the logs at the time of the event I see nothing to the cause of this.
MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0
Any advice on firmware upgrade, replace hardware *cables etc. would be greatly appriciated. Just posting this a bit quick here since I don't have time to sit on the phone for 1h.
Cheers
A.
on 07-10-2021 13:35