07-07-2020 13:02 - edited 04-08-2020 12:38
Hi,
We've identified an intermittent interoperability issue affecting some customers who've bought a BT Premium Whole Home WiFi solution for use with a Hub 3.0.
We're currently working on a fix for this which will be rolling out in a future firmware release. We'll provide an update once the firmware is ready.
Our apologies for any inconvenience caused, please bear with us whilst we get this problem fixed.
on 07-07-2020 13:12
Is this an intermittent problem on all Hub 3.0/BT Whole Home set ups or is it just affecting some? I have this set up but don't think I have problem at the moment. What are the symptoms?
on 07-07-2020 16:04
on 08-07-2020 09:45
That's news. I've been using BT Whole Home for two years, never had a problem.
Probably because I have a proper router after the Hub.
on 10-07-2020 16:23
Hi,
We weren't advised of a specific product within the Whole Home WiFi solution. The problem most likely manifested as intermittent connection to the wireless network or problems connecting altogether.
I'm pleased to say we rolled out a firmware update to the hubs we identified as suffering from this issue this morning, so if you were having issues these should now be resolved.
on 13-07-2020 11:20
Hi
Would this issue also be the case for other home wifi solutions. Like Google WiFi or Nest Wifi? Or is this specific to BT?
Thanks
D
on 13-07-2020 14:21
Hi,
Would the firmware update have been likely to cause an issue (rather than solve an issue) as we have BT Whole Home Wifi installed and all worked perfectly until Friday and now I can't get any connection at all.
Many thanks
on 14-07-2020 09:08
Yes this is the same for us?
on 14-07-2020 09:10
We have experienced problems since Friday, prior to that it was working fine.
on 14-07-2020 09:24
What's going on, @Kev_B?