on 11-02-2023 13:28
Writing to VM support - end users please do not respond, thank you.
I'd like to get a technician to take a look at my account and see if there's any issues because my Ubiquiti router says the connection has high latency (confirmed in graphs) and the speed I'm getting is about half of what it should be connected directly to Modem mode. Maybe power level issues or maybe it's the crappy Hub 4 which still has Puma issues. Please respond via DM as I can't share my account details here.
on 11-02-2023 14:03
Tip of the day: "the speed I'm getting" = the speed your kit is drawing.
Take 15 mins to put the Hub back into Router mode and find out if it operates at the expected speed : https://www.samknows.com/realspeed/
If the Hub is functioning fine, then the question of all of your own kit comes sharply into focus.
If the Hub is not functioning fine check the Power / SNR / Modulations levels are in spec & check 0800 561 0061 for local faults.
on 11-02-2023 14:45
You will not get a response from VM for at least 2 days and they are only call processors not technicians. In any case if you are running in modem mode there is very little they can do unless you go back to router mode and then they can only really see the line stats. There are a lot of technical users on the board who can help you in the meantime, if you wish. My UDM-Pro always gets full speed using the Ookla speed test code I have installed on it. The Ubiquiti Speedtest results are unreliable in my view.
Please provide some stats and we can see the condition of the line.
How to get stats from a VM hub (no need to logon to the hub)
Open a web browser and go to 192.168.0.1 router mode or 192.168.100.1 modem mode
on 13-02-2023 16:00
Hi f43y65yteg5, thanks for the message and sorry to hear that you are having issues with the connection.
How did it go with the speedtest?
Can you create a BQM here and let us know the results?
Kind regards, Chris.
on 13-02-2023 16:45
Hi Chris,
Sure, here's the test. Sometimes I will get full speed but it's really hit and miss. Most of the time I see half speed. Download is always more affected than up but sometimes up is affected too. I am not running tests using the Unifi Dream Machine tester because it's incorrect. I'm only trusting the latency test there. For speed tests I usually do thinkbroadband and fast dot com.
https://www.thinkbroadband.com/speedtest/1676306596864019555
on 15-02-2023 20:16
Hi f43y65yteg5,
Thanks for coming back to us in the Community and for providing the Think Broadband speed results.
In order to measure the latency, a broadband quality monitor is best to set up as this will show us the correct readings along with any patterns.
In terms of checks this end, your downstream power levels are on the high side which will likely be affecting you. We won't be able to fix this remotely so I would like to arrange for an engineer to come to take a look at this for you. I just need to confirm the address to ensure we are booking the visit on the correct account.
I have sent you a private message regarding this. Just click on the little plum envelope at the top right-hand side of the page to access your inbox.
Thanks,