cancel
Showing results for 
Search instead for 
Did you mean: 

Constant WiFi Issues with Hub 3

VM_Man
Joining in

Hello all,

I am a new VM customer. As part of the installation I was given a Hub 3 which seems like I've had a bit of bad luck, as a number of people seem to be reporting similar issues to mine.

Since installation, I've had continuous issues with the WiFi. I have 4 devices connected via Ethernet and they've been absolutely fine.

Initially, I would get constant issues where the WiFi signal would be at full strength on devices, but would have no Internet. After a few minutes it would come back, or by rebooting the router. I had this issues every day, which made calls by Teams/Zoom almost impossible. 

As a test, I tried separating the 5Ghz and 2.6Ghz channels with different SSIDs and, whilst this has improved the situation a little bit, connections are still patchy. I have the router away from other devices, with no obstructions. Also, when running the tests on the website or through the app it states that there is low signal on a bunch of devices, including some that are literally within a couple of feet away from the router with no obstruction in between.

I have also tried removing the smart WiFi option, and manually changing channels but neither has improved the situation.

To me, either the router is faulty or it's common problem with the Hub 3 and I should be requesting a Hub 5?

Any help or suggestions appreciated.

18 REPLIES 18

Client62
Hero

Hub 5's have ghastly WiFi issues, a lousy DHCP server and suffers Ghost call on the telephone service !

Your call ...

legacy1
Alessandro Volta
VM can't just swap everyone to a hub 5 just use modem mode and get your own router with 1Gb ports.
---------------------------------------------------------------

Ashleigh_C
Forum Team
Forum Team

Hi there @VM_Man 

 

Thank you so much for your post and welcome to the community forums, it's great to have you here. 

 

I am so sorry that you have been effected by some issues regarding your WiFi signal. I have checked on our side and I cannot see anything that could be causing these issues. 

 

Can you post your Hub status and logs? How to do this;
• Please go to http://192.168.0.1 (or http://192.168.100.1 - if in modem mode),
• Don't log in, click on 'router status'
• Copy/paste the data from each of the tabs as text into a 'REPLY' as opposed to 'QUICK REPLY'. Please do not include your MAC address.
 

Also, set up a 'Broadband Quality Monitor'. This will monitor the state of your connection and record any network dropouts etc 


Give it a while to gather data and then click 'Share Live graph' and paste the 'Direct Link' into the forum
 

Hi Ash,

Thanks for the reply. I've pasted the information you requested below, so please let me know if you need anything else.

I did call the support number yesterday and they advised me to perform a full reset. I had already done this but did it again. I still had repeats of the issue a couple of time today already.

Many thanks.

Status

Cable Modem Status

Item

Status

Comments

Acquired Downstream Channel (Hz)

330750000

Locked

Ranged Upstream Channel (Hz)

36600002

Locked

Provisioning State

Online

 

 

Downstream 

14

Locked

38.9

5

0

15

Locked

40.3

8

0

16

Locked

38.9

4

0

17

Locked

40.3

5

0

18

Locked

40.3

5

0

19

Locked

40.3

6

0

20

Locked

40.3

1

0

21

Locked

40.3

5

0

22

Locked

40.9

0

0

23

Locked

38.9

6

0

24

Locked

40.3

0

0

Upstream bonded channels

Channel

Frequency (Hz)

Power (dBmV)

Symbol Rate (ksps)

Modulation

Channel ID

1

36600002

44.3

5120

64 qam

3

2

23600043

44.3

5120

64 qam

5

3

30099981

44.3

5120

64 qam

4

4

43099976

44.3

5120

64 qam

2

5

49600002

44.3

5120

64 qam

1

 

Upstream bonded channels

Channel

Channel Type

T1 Timeouts

T2 Timeouts

T3 Timeouts

T4 Timeouts

1

ATDMA

0

0

0

0

2

ATDMA

0

0

0

0

3

ATDMA

0

0

0

0

4

ATDMA

0

0

0

0

5

ATDMA

0

0

0

0

 

Min Traffic Rate

0

 

General Configuration

Network access

Allowed

Maximum Number of CPEs

1

Baseline Privacy

Enabled

DOCSIS Mode

Docsis30

Config file

.iyewrkldJKDHSUBsgvca6983

 

Primary Downstream Service Flow

SFID

18794

Max Traffic Rate

402500089

Max Traffic Burst

42600

Min Traffic Rate

0

 

Primary Upstream Service Flow

SFID

18791

Max Traffic Rate

38500089

Max Traffic Burst

42600

Min Traffic Rate

0

Max Concatenated Burst

42600

Scheduling Type

BestEffort

Network Log

Time

Priority

Description

07/03/2023 16:47:34

notice

LAN login Success;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx-QOS=1.1;CM-VER=3.0;

01/01/1970 00:01:42

critical

No Ranging Response received - T3 time-out;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx-QOS=1.1;CM-VER=3.0;

07/03/2023 12:28:57

notice

NOTICE ATOM is restarted due to Kernel/oops panic as part of Self Healing Mechanism ;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

06/03/2023 22:36:54

notice

DHCP Renew - lease parameters tftp file-cmreg-vmdg505-bbt062-b.cm modified;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx-QOS=1.1;CM-VER=3.0;

06/03/2023 22:36:54

Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

06/03/2023 02:11:21

critical

No Ranging Response received - T3 time-out;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

05/03/2023 16:25:45

notice

NOTICE ATOM is restarted due to Kernel/oops panic as part of Self Healing Mechanism ;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

05/03/2023 00:47:45

critical

No Ranging Response received - T3 time-out;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

04/03/2023 03:49:22

notice

NOTICE ATOM is restarted due to Kernel/oops panic as part of Self Healing Mechanism ;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

03/03/2023 18:16:34

critical

No Ranging Response received - T3 time-out;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

03/03/2023 07:58:31

notice

NOTICE ATOM is restarted due to Kernel/oops panic as part of Self Healing Mechanism ;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

03/03/2023 02:04:34

notice

DHCP Renew - lease parameters tftp file-cmreg-vmdg505-bbt062-b.cm modified;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

03/03/2023 02:04:34

Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

01/03/2023 16:01:41

critical

No Ranging Response received - T3 time-out;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

28/02/2023 09:10:3

notice

LAN login Success;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

28/02/2023 07:07:49

critical

No Ranging Response received - T3 time-out;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

27/02/2023 19:29:59

notice

DHCP Renew - lease parameters tftp file-cmreg-vmdg505-bbt062-b.cm modified;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

27/02/2023 19:29:59

Error

DHCP RENEW WARNING - Field invalid in response v4 option;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

25/02/2023 18:06:55

notice

LAN login Success;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

25/02/2023 02:16:49

critical

No Ranging Response received - T3 time-out;CM-MAC=xxxxxxxxxxxxxxxxx;CMTS-MAC=xxxxxxxxxxxxxxxxx;CM-QOS=1.1;CM-VER=3.0;

 

Thanks for coming back to us VM_Man, I have looked into your connection on our system and cannot find any issues at the moment. I have looked into the connection in your local area and cannot see any issues there either. 

Has anything improved since your last post on Wednesday? 

Kind Regards,

Steven_L


@Steven_L wrote:

Thanks for coming back to us VM_Man, I have looked into your connection on our system and cannot find any issues at the moment. I have looked into the connection in your local area and cannot see any issues there either. 

Has anything improved since your last post on Wednesday? 

Kind Regards,

Steven_L


For heaven's sake:  what's the matter with VM?  Don't they brief the Forum Team properly?

https://www.ispreview.co.uk/index.php/2018/08/intel-coughs-to-puma-cpu-flaw-that-hit-virgin-media-hu...

The Hub 3 is a flawed device and yet is knowingly supplied to customers.  The Network Log provides the problem for you to admit:  The ATOM KERNEL/OOPS messages.  

Might you please amend your reply to VM_Man?  Or won't those upstairs let you give a straight answer?

 

Seph - ( DEFROCKED - My advice is at your risk)

Adri_G
Forum Team (Retired)
Forum Team (Retired)

Hey Sephiroth, thanks for your reply and sorry to see your frustration with our follow up questions.

We'd love to best help and advise on the issues you're facing with your connection at home.
From our checks the speeds and hub/service performance look great, so the issue may be limited to the wireless signal in the house.

Could you please advise if you're using our Connect App where you can run a scan for weak and blind spots in the property?

Let us know if you're able to do this and what results you get so we can advise further from there.

Adri
Forum Team

New around here? Check out the do's and don'ts, in our Community FAQs


Hello,

After about a week of no issues, I've had another WiFi drop this morning with the ATOM error in the network log. As I've mentioned before, the connection has been solid and this is just a WiFi issue with it dropping completely, the WiFi light on the router flashing for about 5 minutes and then coming back. This issue also produces the ATOM error in the log.

There is clearly an issue either with this router or the model of router (as mentioned in another post on this thread). So look forward to getting your suggestion for next steps.

Regards.

17/03/2023 07:57:12noticeNOTICE ATOM is restarted due to Kernel/oops panic as part of Self Healing Mechanism ;CM-MAC=**:**:**:**:**:**;CMTS-MAC=**:**:**:**:**:**;CM-QOS=1.1;CM-VER=3.0;
   

 


@Sephiroth wrote:

@Steven_L wrote:

Thanks for coming back to us VM_Man, I have looked into your connection on our system and cannot find any issues at the moment. I have looked into the connection in your local area and cannot see any issues there either. 

Has anything improved since your last post on Wednesday? 

Kind Regards,

Steven_L


For heaven's sake:  what's the matter with VM?  Don't they brief the Forum Team properly?

https://www.ispreview.co.uk/index.php/2018/08/intel-coughs-to-puma-cpu-flaw-that-hit-virgin-media-hu...

The Hub 3 is a flawed device and yet is knowingly supplied to customers.  The Network Log provides the problem for you to admit:  The ATOM KERNEL/OOPS messages.  

Might you please amend your reply to VM_Man?  Or won't those upstairs let you give a straight answer?

 


What doesn't VM understand about the Hub 3 and it's proven processor flaw?  Btw, in modem mode, this doesn't happen according to my past experience when I had a Hub 3 (I don't now).

 

Seph - ( DEFROCKED - My advice is at your risk)