on 04-12-2019 20:15
Iv bought kurvia smart wifi plugs but can’t connect with wifi as they need 2.4GHz? Anyone able to tell me in simple terms how to do this, I don’t have a clue
Answered! Go to Answer
on 04-12-2019 20:20
Hello
I am aware that some devices have problems connecting to the hub when smart wifi is turn on, so lets get it turned off.
Login into the hub at http://192.168.0.1 using the details from the base of the hub on a sticker.
When in goto "Advanced Settings", "Wireless", then "Wireless Signal", place a tick in circle where it says "Disable Channel Optimization" and then click on "Apply Changes".
That should solve your problem with connecting to the hub.
Regards Mike
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 04-12-2019 20:20
Hello
I am aware that some devices have problems connecting to the hub when smart wifi is turn on, so lets get it turned off.
Login into the hub at http://192.168.0.1 using the details from the base of the hub on a sticker.
When in goto "Advanced Settings", "Wireless", then "Wireless Signal", place a tick in circle where it says "Disable Channel Optimization" and then click on "Apply Changes".
That should solve your problem with connecting to the hub.
Regards Mike
I'm a Very Insightful Person, I'm here to share knowledge, I don't work for Virgin Media. Learn more
Have I helped? Click Mark as Helpful Answer or use Kudos to say thanks
on 04-12-2019 21:59
That’s great I’ll follow that. Thanks for your help 👍🏻
on 31-12-2019 14:21
on 07-01-2021 15:58
I now have a virgin hub 4
i have two Jomarto smart plugs which worked with Virgin hub 3 and also so off in-line smart switches and cannot connect them to the wifi
i have read previous answer and followed instructions through to ‘Wireless signal’ but there was no ‘Disable channel optimatization’ on the page.
I have tried to connect them by disabling the 5gHz frequency but no luck
any suggestions would be most welcome
thanks
on 25-01-2022 07:47
Thank you for your post and I have just tried that. However, when selecting disable channel …etc it switches off my Alexas and they won’t connect to the internet. Confused and any further help would be appreciated Hub 3.0 fitted yesterday
Regards
on 27-01-2022 14:15
on 28-01-2022 14:05
Ahoy
Thank you. I'm using a combination of Meross plugs and Lohas light bulbs. I have fixed it however, using our friends advice above and changing the wifi to 2.4 ghz to connect them all then swapping back to the default.
on 30-01-2022 16:07
We're glad to hear that has all been sorted for you Bunting.
^Martin
on 30-10-2022 05:32
Thank you so much for your answer! I was a little apprehensive about trying to connect a smart plug but your clear instructions made it simple and totally pain free. Cheers!