13-02-2023 16:56 - edited 13-02-2023 17:13
Hi there,
Hope you are well.
Looking for any assistance on a problem we are having with our Hub 3.0. My Windows laptop and PS4 are unable to connect to the internet. Even though on the Windows laptop it says it is connected but 'no internet'.
We think this has been caused by us 'pausing' some devices via the app after we noticed some unusual activity. We did not pause my phone or other laptop and they are connecting to the WiFi as usual - but we have paused and unpaused the Windows laptop and PS4. Now they both seem incapable of connecting sufficiently.
Does anybody have any thoughts?
Many thanks
Answered! Go to Answer
on 13-02-2023 17:48
Try a pin-hole reset of the hub, this will get rid of any paused devices.
on 13-02-2023 17:13
Btw: I am currently tethering the WiFi to the laptop via my phone but this is not an ideal solution
on 13-02-2023 17:48
Try a pin-hole reset of the hub, this will get rid of any paused devices.
on 15-02-2023 20:27
Hi adbjb,
Thanks for your post and a big welcome to the Community. It's great having you on board with us.
We're sorry to hear you're having an issue with this. Tudor's advise of resetting of the hub by the pin hole reset button should help but you will need to ensure that you hold the button in for a times 45 seconds minimum. Also before doing this make sure the details on the bottom of your hub are readable as you'll need these to reconnect.
We'd love to take a closer look in to things if this doesn't work but have been unable to locate you on our systems using your forum credentials. We will need to confirm some information with you in order for us to proceed with checks.
I have sent you a direct message to allow us to do this with you in a private space. Just click on the little envelope at the top right-hand side of the page to access your inbox.
Thanks,
on 28-02-2023 18:43
Hi all,
Resetting on the pin button on the back of the hub worked for this. Did it for 45 seconds, and didn't need to log back in to all devices.
All sorted
Thanks a lot
28-02-2023 19:04 - edited 28-02-2023 19:04
Pausing devices is a fraught idea, imagine if you paused your wife's office laptop in error during a Zoom call ... oh la la !
If you need to free the devices again, this may be quicker ...
Login to the Hub's menu
Hub 3 menus >>> Advanced settings >>> Wireless >>> Security >>> "Wireless MAC filtering" (tick) Disabled
now scroll down and click Apply changes
Job done