Menu
Reply
Highlighted
  • 20
  • 0
  • 0
ptrwiv
Tuning in
740 Views
Message 1 of 16
Flag for a moderator

Packet loss

Hi,

The last few days I've noticed games and things like Discord not being right and can see I'm getting packet loss as shown below. I've done a reboot of the SH but made no difference. Can my connection be checked please? As far as I can remember the signal stats below look fine?

Capture.JPGCapture1.JPGCapture2.JPGCapture3.JPGCapture4.JPG

0 Kudos
Reply
  • 10.91K
  • 720
  • 3.12K
Superuser
Superuser
737 Views
Message 2 of 16
Flag for a moderator

Re: Packet loss

Can you post network logs from your HUB?

Looks like one of your upstream channels is crapping out, although the levels are fine its fallen back to 16QAM and is showing a substantial number of T3's

Id expect to see "RCS partial service" in your logs... at which point I have the metrics I need to escalate it for you.

 


0 Kudos
Reply
  • 20
  • 0
  • 0
ptrwiv
Tuning in
699 Views
Message 3 of 16
Flag for a moderator

Re: Packet loss

Log below, thanks!

Capture.JPG

0 Kudos
Reply
  • 10.91K
  • 720
  • 3.12K
Superuser
Superuser
687 Views
Message 4 of 16
Flag for a moderator

Re: Packet loss

Oh BUM, all we are seeing are the upstream T3's

Ill flag for staff anyhoo, see if they can run some tests their side

 


  • 20
  • 0
  • 0
ptrwiv
Tuning in
645 Views
Message 5 of 16
Flag for a moderator

Re: Packet loss

That'll be great if they could. I took off the attenuator (-10db) just in case that was causing it and it still looks the same - one upstream channel using 16QAM. The signal levels have obviously changed so I think it is better with it on, do you agree?

Capture.JPGCapture2.JPGCapture3.JPGCapture4.JPG

0 Kudos
Reply
  • 10.91K
  • 720
  • 3.12K
Superuser
Superuser
628 Views
Message 6 of 16
Flag for a moderator

Re: Packet loss

Yup DS levels over 10 are "best avoided"

Attenuate that HUB guy!

Also ill flag again for staff as it should heave been picked up by now.

 


  • 14.59K
  • 432
  • 46
Moderator (Retired) Ralph_R
Moderator (Retired)
620 Views
Message 7 of 16
Flag for a moderator

Re: Packet loss

Yep needs the attenuator connected....checking over your connection I can see that one of your cable upstream channels is also reporting some FEC issues and this may be the source of the packet loss. I've flagged this to networks for further investigation.

If you bump us in a day or two we'll recheck the power levels and see how networks are progressing with the area fault.

Cheers

Ralph_R
Forum Moderator

The do's and don'ts. Keep the community welcoming for all. Follow the house rules


0 Kudos
Reply
  • 20
  • 0
  • 0
ptrwiv
Tuning in
586 Views
Message 8 of 16
Flag for a moderator

Re: Packet loss

Hi,

I've put the attenuator back on so the levels are back to normal. That upstream channel is still incorrect though.

Thanks

Pete

0 Kudos
Reply
  • 15.2K
  • 653
  • 32
Moderator (Retired) John_G
Moderator (Retired)
562 Views
Message 9 of 16
Flag for a moderator

Re: Packet loss

Hi Ptrwiv,

Following Ralphs flag to network there is currently a SNR fault open for your area under ticket F006831119. This is due to close 21/01/19 though faults like this can be quite complicated and may be delayed.

If you post again following the 21st we can take another look and get you an update.

Thanks


The do's and don'ts. Keep the community welcoming for all. Follow the house rules


  • 20
  • 0
  • 0
ptrwiv
Tuning in
464 Views
Message 10 of 16
Flag for a moderator

Re: Packet loss

Stats are worse now Smiley Sad Packet loss is still 5-10%.

Capture.JPG

0 Kudos
Reply