@legacy1 wrote: Maybe the NAT test can't tell between a good NAT and bad NAT.
It's a bit worse than that.
It changes NAT type based on the link status. So two non-related things change how something is "named". Nintendo have really bad advice on this and I honestly can see that their own hardware will probably be just as badly designed as their help pages.
OP seems to have it working now, just ignoring the warnings as they seem to warn about a non-issue and do it incorrectly.
There seems to be A, B, C, D, F NAT types.
What is worse is that none of the support pages (that I could find in the past at least) gave any real info on what each NAT type was or was not. The test that it runs to check for NAT type could be wrong too, much like Microsoft and Android are often confused about connected with or without internet.
---- I do not work for VM, but I would. It is just a Job.
I would also make websites for them, because the job never seems to require the website to work.
Yep, I took a look some time back and they don't appear to have any break down of what each NAT type in their test actually stands for.
If that wasn't bad enough it seems NAT type A can only be obtained if you have an ethernet adapter connected to the Switch and are using wired ethernet, wireless will never go beyond B. It's such a convoluted test.
Yea! I would try and just play online when you make any network changes... chances are it just works with no explanation! I have never experienced NAT issues since the 360 came out and that was when I was trying to bridge my network connection with my PC wireless card (didn’t want to buy the Xbox wireless adapter!).