Menu
Reply
  • 15
  • 0
  • 0
nbharakhada
Joining in
166 Views
Message 1 of 2
Flag for a moderator

Checking Device Stats

This morning, I had an outage... after about 30mins, the connection came back up. I noticed alot of pre and post rs errors - what are these? 

Anyways - i reset the counters and will be checking them in an hour or so.

Can someone check whether the device stats are ok?

downstream.PNG

upstream.PNG

upstream burst.PNG

Thanks

0 Kudos
Reply
Highlighted
  • 13.16K
  • 1.66K
  • 4K
Superuser
Superuser
150 Views
Message 2 of 2
Flag for a moderator

Re: Checking Device Stats

The downstream is fine. Power levels nicely in the middle, SNR is healthy too. Upstream is looking fine too, with the power levels also nicely in the middle. A few timeouts on the 4th upstream, but when you have a drop out period / powering up the hub / rebooting the hub it is common to pick up a few T3s (no issue.) Pre-rs is errors in received network data that gets corrected, if it cannot correct it, it ends up as post rs. When there is an outage, clocking up some post RS is normal. It is also normal to have a small amount of post rs show after powerup/rebooting the hub.

0 Kudos
Reply