BQM Issue
Hi all, I've had a BQM running for a while now. Results were all good. Late last night I noticed the graph was solid red, i.e. no connection, yet the internet connection was very good. My IP addr...
Forum Discussion
Hi Bill,
I've found that my BQM has changed red for no apparent reason a couple of times in the past, but a reboot of my hub has restarted the BQM. It generally only goes completely red if there's a change of IP address, no connection, or no ICMP response.
There isn't a visible ICMP within the hub 5 settings, and I don't recall having to set it when using the hub 3.
You could turn ICMP on and off on the older hub 2 under Advanced Settings >Tools > Ping> and then tick the box for "Respond to ICMP echo requests sent to WAN IP