Forum Discussion
log into hub3 - 192.168.0.1 [or 192.168.100.1 if in modem mode] - DON'T SIGN IN, click - click router status [centre of screen] - and post the downstream and upstream figures - to see those press on the grey buttons/boxes labelled - upstream - downstream
also post the info from the config page
I suspect you are in the same boat as myself. The new router has the 600Mb config instead of the 1Gb and hasn't been upgraded yet. I guess a frustrating call to "customer services" may be required.
- Richw19824 years agoRising star
SFID 8624Max Traffic Rate 1200000450Max Traffic Burst 42600Min Traffic Rate 0This is what the downstream config should roughly be for 1 Gig. Most issues with slow speeds on 1 Gig are down to the devices not being capable of the speed. Try RealSpeed - SamKnows this will give you the speed to the router and also your device
- jem1014 years agoSuperstar
Richw1982 wrote:SFID 8624Max Traffic Rate 1200000450Max Traffic Burst 42600Min Traffic Rate 0This is what the downstream config should roughly be for 1 Gig. Most issues with slow speeds on 1 Gig are down to the devices not being capable of the speed. Try RealSpeed - SamKnows this will give you the speed to the router and also your device
‘Thins will give you the (real*) speed to the router and the (real*) speed to your device.
OK, and how exactly can we be sure that the results are in any way accurate?
* seriously? And how exactly are these values obtained?
- Richw19824 years agoRising star
Yes it will check the speed to the Hub and the speed to the device. It would get the values the same way any other speed test gets its values so i am not sure what the point is your trying to make. Trying to eliminate the limitations of the customers device or any external influences on Wi-Fi would be the first steps of a reasonable diagnosis
Related Content
- 4 months ago
- 9 months ago
- 10 months ago