Check your service statusCable National
Ask a question
Reply
Fresh as a Daisy
AE1980
Posts: 2
Registered: ‎27-11-2010
Helpful Answer

D-Link DIR-615 IP Problem

[ Edited ]

I want to change my WAN IP address, so I connect my computer to my Virgin Media Modem directly, reboot, run CMD as admin, and enter the commands:

 

ipconfig /release (or ipconfig /flushdns)

 

ipconfig /renew

 

The IP address changes successfully, as I visit the site http://www.ip-adress.com/ and I can clearly see that it has changed.

 

Now I reboot my D-Link DIR-615 Wireless Router and connect it to my Modem, and my computer to the Router, my WAN IP address changes back to what it was before.

 

I have also tried these commands, but still didn't help:

 

netsh winsock reset catalog

 

netsh int ip reset reset.log

 

Thanks for reading.

Please use plain text.
Superuser
paultechy
Posts: 9,208
Registered: ‎08-06-2010

Re: D-Link DIR-615 IP Problem

once logged into the dlink via http://192.168.0.1 username admin password left blank click on internet setup, and choose manual, and then press the button that says clone mac address, press on save settings, this tells the local router that the dlink is the same device as your PC/laptop.

 

----------------------------------------------------------
If someone's helped you out say thanks by clicking on the Kudos Star. If someone's solved your problem, why not mark their message as an Accepted Solution
Please use plain text.
Fresh as a Daisy
AE1980
Posts: 2
Registered: ‎27-11-2010

Re: D-Link DIR-615 IP Problem

Thank you so much, it has changed and all my devices on the network work perfectly!

Please use plain text.