Menu
Reply
  • 3
  • 0
  • 0
briandb
Joining in
297 Views
Message 1 of 3
Flag for a moderator

TiVo code for Panasonic tx-48cx400b

I have just bought a new Panasonic TV tx-48cx400b, I attempted a number of times following the instructions to programme my TiVo controller without success. Although I get to the point where the controller turns off the TV it won't turn it on again or control the volume and if as in the instructions I attempt to carry on searching for the correct code the up and down channel button just changes channel. I've also tried from the 0999 input on the controller to search the other way I.e. Using the channel down button and again I get to the point where the tv turns off but still the TiVo controller will not turn it back on or control the volume.

Tags (1)
0 Kudos
Reply
  • 639
  • 68
  • 176
Argy
Rising star
278 Views
Message 2 of 3
Flag for a moderator

Re: TiVo code for Panasonic tx-48cx400b

Have you run through the search feature detailed here?

http://help.virginmedia.com/system/viewArticle.jsp?uuid=54960ED6-D796-4AEF-9887-5E67289E1EA3http://h...

1. Reset the remote to its original settings:

Press and hold down clear and TV on the remote at the same time until the light on the top of the remote flashes green twice.
Press Thumb down three times, then press ok
The LED will flash green four times and exit programming mode.

2: Programming your remote using a code search
The simplest way to programme your TiVo remote to work with your TV is by searching for the correct code.

Make sure your TV and your TiVo box are switched on.
Press and hold down Clear and TV at the same time, until the light on the top of the remote flashes green twice.
Enter the code 0999 to access the TV code database - the LED will flash green twice.
Press channel up repeatedly until a code turns off your TV - the LED will flash green each time a code is sent.
When your TV turns off, use your TV remote to turn your TV back on.


This has been asked before https://community.virginmedia.com/t5/Virgin-Media-TiVo-service/Panasonic-Viera-TX48CX400B-TiVo-remot... and the poster found that it did work after a couple of months, because he thought that the TV's firmware had been upgraded in that period.

In case he is right, have you checked that your TV is running the latest Panasonic firmware?

 


Just another VM user trying to help, so no guarantees that my advice will work .
If my suggestion is helpful, please mark it as helpful; it may help others. Just want to say "Thanks"? That's the Kudos button.
0 Kudos
Reply
  • 3
  • 0
  • 0
briandb
Joining in
265 Views
Message 3 of 3
Flag for a moderator

Re: TiVo code for Panasonic tx-48cx400b

Thank you for your reply, yes I had tried resetting the controller and checking that the system on the TV was up to date, tried it yet again just now still no joy. Seems like I will just have to keep using 2 controllers.

0 Kudos
Reply