Re: TIVO REMOTE CONTROL CODE FOR HITACHI 32HBT46U (SMART TV)?
Have you tried the database search first?
Y1: Reset remote To clear your changes and reset your remote to its original settings:
Press and hold down clear and TV on the remote at the same time until the light on the top of the remote flashes green twice. Press Thumb down three times, then press ok The LED will flash green four times and exit programming mode.
2: Programming your remote using a code search The simplest way to programme your TiVo remote to work with your TV is by searching for the correct code.
Make sure your TV and your TiVo box are switched on. Press and hold down Clear and TV at the same time, until the light on the top of the remote flashes green twice. Enter the code 0999 to access the TV code database - the LED will flash green twice. Press channel up repeatedly until a code turns off your TV - the LED will flash green each time a code is sent. When your TV turns off, use your TV remote to turn your TV back on.
3: Extra step for HiSense TVs
Go backwards till you see that the setup menu on TV has been triggered then use Hisense remote to put it back onto VM channel and carry on with code search till TV switches off, switch TV back on using TiVo remote check volume and mute settings press OK to save settings or you will lose them and have to start again
Just another VM user trying to help, so no guarantees that my advice will work . If my suggestion is helpful, please mark it as helpful; it may help others. Just want to say "Thanks"? That's the Kudos button.