on 19-01-2016 22:30
I have currently just had virgin out into my address and to my dismay I have found I can not change my internal ip address for the network in the superhub 3. I have always detested using default setting in any router I have bought or have used. I have my whole network manually set with ip addresses, I don't like using the range 192.168.*.* is there anyway of changing the setting to match all of my already set ip addresses across my network?
many thanks
on 13-02-2018 17:07
13-03-2018 18:51 - edited 13-03-2018 18:52
Any chance of resubmitting the link please Sephiroth?
Cheers
on 13-03-2018 20:02
The thought police seem to have deleted the thread. Anyway, afaik, the upcoming Hub 3 firmware release allows you to change your DHCP address.
on 13-03-2018 20:41
Thanks for the quick reply, do you know this this firmware update might be available, also I tried to change my ip address settings which seems to have taken effect, however I can no longer log into my hub 3 settings, do you know how to factory reset the hub at all?
Thanks for any help
Seldomsober
on 14-03-2018 10:05
Which firmware are you on?
FR is done by a pinhole at the rear of the hub. Press the pinhole button for as long as it takes for the hub front LED to glitch and go green.
Keep us posted.
14-03-2018 10:23 - edited 14-03-2018 10:23
@Sephirothwrote:The thought police seem to have deleted the thread. Anyway, afaik, the upcoming Hub 3 firmware release allows you to change your DHCP address.
In the meantime, the instructions are still posted in this thread, http://community.virginmedia.com/t5/QuickStart-set-up-and/Superhub-3-internal-network-address/m-p/31... and several followups a few posts later.
Andre
on 14-03-2018 17:29
Hi Andre,
Thanks for your reply, these are the instructions that I used to change the ip address, which according to ipconfig has successfully changed, however since changing the ip address I can no longer log into the hubs control panel
on 14-03-2018 17:45
@Seldomsoberwrote:Hi Andre,
Thanks for your reply, these are the instructions that I used to change the ip address, which according to ipconfig has successfully changed, however since changing the ip address I can no longer log into the hubs control panel
You should be able to log in the hub by 192.168.100.1 even in router mode
on 14-03-2018 17:54
@Seldomsoberwrote:Hi Andre,
Thanks for your reply, these are the instructions that I used to change the ip address, which according to ipconfig has successfully changed, however since changing the ip address I can no longer log into the hubs control panel
Yes, I had the same issue (it happened after a subsequent firmware update from Virgin I seem to recall). As that meant I could make no further changes in settings later (such as new port forwarding rules) that's why I eventually gave up and bought a proper wireless router, and now just run the Not-So-Super-Hub in modem mode.
Andre
on 15-03-2018 14:21
The software version is 9.1.116.603
I assume this is the firmware number