my router is stuck behind the tv in the corner of the house,
my plan is to move router more central about 10m from where it is just now.
1 had the hub 3 but it was wasnt the best so i downgraded to the 2ac
at the moment i still have coxial cable that came with the hub 3 (the one with isolation cylinder thing on it),
ii was going use some lszh dcs100 premium plus cable that i allready have and some screw in f connectors but i was wondering if i should connect to hub 3 coxial cable or remove it altogether and connect straight into box on the wall thanks ,
your connection is just a split and power balanced cable from a splitter in the green box. change the cable can change the power levels that were set when installed and effect your connection. any faults or bad cable/install can lead to noise injected into the network taking down the connections of everyone in the area. its against the T&C to modify the cable my yourself you will need to get VM to move it. Standard cost for this is £99
i really cant see myself paying virgin £100 to do this ,they will never know i have done it but i would be greatfull if you could answer my question in my post as you seem to know more about this than i do .