Menu
Reply
  • 10
  • 0
  • 1
iarhill
Tuning in
899 Views
Message 1 of 3
Flag for a moderator

Router error messages

This am my husband's computer could not connect wirelessly.  All the lights on the superhub 2 were normal. I did the usual stuff, restarting, trouble shooting wizard, uninstalling and reinstalling the network adaptor etc but to no avail. This afternoon I fired up, was asked for the network password and got connectivity. (I have not changed the channel but left it on auto)

I decided to look at the router status and found these errors. Should I be concerned? I have not noticed any problems.

 

27/11/2016 14:31:31 GMT27/11/2016 14:31:31 GMTWarning (5)66050310Auth Success - Web login successful.
27/11/2016 10:00:41 GMT27/11/2016 10:00:41 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
26/11/2016 22:38:56 GMT26/11/2016 22:38:56 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 11:19:19 GMT23/11/2016 11:19:19 GMTError (4)68010400DHCP REBIND WARNING - Field invalid in response
23/11/2016 11:18:27 GMT23/11/2016 11:18:27 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 11:17:38 GMT23/11/2016 11:17:38 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 11:15:59 GMT23/11/2016 11:15:59 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 11:12:42 GMT23/11/2016 11:12:42 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 11:06:08 GMT23/11/2016 11:06:08 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 10:53:00 GMT23/11/2016 10:53:00 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 10:26:43 GMT23/11/2016 10:26:43 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 09:34:10 GMT23/11/2016 09:34:10 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 07:49:04 GMT23/11/2016 07:49:04 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
23/11/2016 04:18:52 GMT23/11/2016 04:18:52 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
22/11/2016 21:18:27 GMT22/11/2016 21:18:27 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
22/11/2016 07:17:36 GMT22/11/2016 07:17:36 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
18/11/2016 00:31:25 GMT18/11/2016 00:31:25 GMTError (4)68010400DHCP REBIND WARNING - Field invalid in response
18/11/2016 00:30:44 GMT18/11/2016 00:30:44 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
18/11/2016 00:30:05 GMT18/11/2016 00:30:05 GMTError (4)68010100DHCP RENEW sent - No response for IPv4
18/11/2016 00:28:48 GMT18/11/2016 00:28:48 GMTError (4)68010100DHCP RENEW sent - No response for IPv4

 

 

 

0 Kudos
Reply
  • 9.01K
  • 760
  • 1.88K
Superuser
Superuser
885 Views
Message 2 of 3
Flag for a moderator

Re: Router error messages

Those errors are just a VM security measure where VM's  DHCP server refuses to issue a IP address to the hub whilst the hub is in a Renew state. VM's DHCP server will not issue a IP address to the hub untill the hub goes into the Rebind state, where it has to provide additional credentials to obtain an IP lease. More on the DHCP life cycle here.

There is no need for concern

  • 10
  • 0
  • 1
iarhill
Tuning in
860 Views
Message 3 of 3
Flag for a moderator

Re: Router error messages

Many thanks for that reply. I would have replied sooner but could not find this thread! I have reseated the network card and am hoping that will sort out the intermittent loss of connection

0 Kudos
Reply