Menu
Reply
Joining in
  • 3
  • 0
  • 0
Registered: ‎25-05-2017
Message 1 of 3 (56 Views)

No ethernet signal but have wifi

Hi there unsure about this since got hub 3 ethernets been working fine hardwired laptop and powerlines for my 2 sons ps4s today nothing did loopback that gave me solid green light lan 1 and 3 am sure i used also reset router which worked for 5 minutes then nothing enginner arranged for wed 16 th aug any other suggestions requested new hub or back to my hub 2 which had no problems any help wouod be gratefull
Reply
0 Kudos
Tuning in
  • 63
  • 4
  • 14
Registered: 3 weeks ago
Message 2 of 3 (26 Views)

Re: No ethernet signal but have wifi

Hi

If I understand correctly the WiFi is functional, and ethernet connections fail.

I can suggest a few thing that you might want to do at a command prompt as administrator....

cmd.png  Type some of the following...

ping LOOPBACK
ping 8.8.8.8
netsh interface ip show interface
ipconfig /flushdns
ipconfig /registerdns
netsh int ipv4 reset reset.log
ipconfig /release
ipconfig /renew
nbtstat -RR
netsh lan show interfaces | more /c
nslookup /ns
ipconfig
arp /a
netstat -e -r -s | more /c
netsh winsock reset catalog

Hopefully one of those may clear the problem.

 

 

 

Reply
0 Kudos
Joining in
  • 3
  • 0
  • 0
Registered: ‎25-05-2017
Message 3 of 3 (21 Views)

Re: No ethernet signal but have wifi

Am new to all this technical jargon but rebooted router still same problem done loopback with ethernet got 2 green lights but still no connection swopped cable for another cat 5 viola seem to have worked have connection again will keep eye on it then if persists will attempt what you said thanks for reply appreciated


Reply
0 Kudos