Menu
Reply
  • 8
  • 0
  • 0
trubluru
Joining in
409 Views
Message 1 of 8
Flag for a moderator

Diagnostic tool

I just ran the diagnostic tool on my hub and got the below results:



Diagnostic Results...
 WiFi signal strength of bobbyjunior is -69dBm.
 WiFi signal strength of XboxOne is -79dBm.
 WiFi signal strength of android-************* is -58dBm.
 WiFi signal strength of grants-MBP is -62dBm.
 WiFi signal strength of android-************ is -78dBm.
 Wireless primary network is Enabled on 2.4GHz.
 Wireless primary network is Enabled on 5GHz.
 Internet connection is good.
 Telephone line 1 is disabled
 Telephone line 2 is disabled
 Wired client on port 2 is running at 10 Mbps.
 Wired client on port 1 is running at 100 Mbps.
 Wired client on port 3 is running at 100 Mbps.
 Wired client on port 4 is running at 100 Mbps.
 Wireless guest network is Disabled on 2.4GHz.
 Wireless guest network is Disabled on 5GHz.
 
Quite a few exclamation marks how do i sort these errors
thanks for any help, ps it needs to be idiot proof any help as i aint very techy
 
[MOD EDIT: Inappropriate Content removed (Personal MAC addresses), please review the Forum Guidelines]
0 Kudos
Reply
  • 8
  • 0
  • 0
trubluru
Joining in
408 Views
Message 2 of 8
Flag for a moderator

Re: Diagnostic tool

Sorry i dont know how that happened

 

0 Kudos
Reply
  • 8
  • 0
  • 0
trubluru
Joining in
368 Views
Message 3 of 8
Flag for a moderator

Re: Diagnostic tool

Can i assume no one knows 

0 Kudos
Reply
  • 514
  • 27
  • 121
deviousiphone
Rising star
361 Views
Message 4 of 8
Flag for a moderator

Re: Diagnostic tool

because your pictures contained information against forum rules we can't see what they are showing at all, which means we can't see the actual problem

0 Kudos
Reply
  • 8
  • 0
  • 0
trubluru
Joining in
358 Views
Message 5 of 8
Flag for a moderator

Re: Diagnostic tool

Oh sorry i didnt realise

 

0 Kudos
Reply
  • 8
  • 0
  • 0
trubluru
Joining in
348 Views
Message 6 of 8
Flag for a moderator

Re: Diagnostic tool

I have these errors

 

 Wired client on port 2 is running at 10 Mbps.
 Device connected on port 2 is running at a lower speed of 10 Mbps and is not utilizing the full available speed.
 Wired client on port 3 is running at 100 Mbps.
 Wired client on port 1 is running at 100 Mbps.
 Wired client on port 4 is running at 100 Mbps.
 Wireless guest network is Disabled on 2.4GHz.
 Wireless guest network is Disabled on 5GHz

 

So sorry dont know why it pastes that size

0 Kudos
Reply
  • 16.1K
  • 1.34K
  • 3.27K
Superuser
Superuser
328 Views
Message 7 of 8
Flag for a moderator

Re: Diagnostic tool

shouldn't really have any devices running on a 10mbps connection, what devices do you have wired to the hub?
----------------------------------------------------------
If someone's helped you out say thanks by clicking on the thumbs up. If someone's solved your problem, why not mark their message as an Accepted Solution
0 Kudos
Reply
  • 8
  • 0
  • 0
trubluru
Joining in
310 Views
Message 8 of 8
Flag for a moderator

Re: Diagnostic tool

Hi thanks for the reply , i have a tp link connected, my hive heating hub and my tvs

0 Kudos
Reply