Re: New superhub 2 , xbone strict nat, stuck behind a port symmetric Nat it says . Any help , thanks.
Try giving your xb1 a static IP address. Go into settings. Then network. Then wired settings and dns settings (automatic) and write them down. Then go back in and go to manual settings fill them in and save them. Try that. If it's still strict. Turn off your modem at the modem and pull out the power. Leave for a couple of minutes and then test your network on the xb1. If that doesn't Google port forwarding and then do those ports on your modem settings. Or you can put your xb1 in the dmz zone on your modem settings which is just the last digit of the ip for your xb1.